6 Gearbox Types and their Upkeep Tips

Speed, torque, noise, and so on—there are several factors that impact how well your gearbox works its main purpose. Choosing the right one is crucial. Thus, when you’re buying a highly-recommended brand of gearbox like the Transtecno gearbox Australia has right now, you have to get the best out of it.

If you get nonchalant in choosing your gearbox, prepare for confusion once your equipment demands a quick repair. To prevent that from happening, just follow this guide to buying the right type of Transtecno gearbox Australia has today:

Types of Gearboxes

Whether you’re buying a Transtecno gearbox Australia distributors are selling or Transtecno is directly offering, you may encounter a few of these gearbox types. Know what suits your equipment best:

1. Spur gearboxes

This type of Australian Transtecno gearbox is fairly common with their ability to deal with high-gear ratios. Their radial teeth offer up to 98% efficiency levels. Its only notable flaw is its annoying noise and pressure. So, for environments where loud sounds are not an issue, you can use a Spur Gearbox.

Maintenance: Inspect the gear’s mesh and the engine mounting screw from time to time. Get rid of pebbles. Replace once it’s full of wears.

2. Helical gearboxes

Similar to Spur Gearboxes, they also provide an efficiency range of up to 98 percent. These types’ gears are locked at a 90-degree angle, but their teeth aren’t placed sideways to the circulating axis. The key drawback of using Helical Gearboxes is its medial thrust’s intensity, which requires well-oiled shaft bearings.

Maintenance: Check for an extreme misalignment to make sure there’s no Macropitting.

3. Bevel gearboxes

These are built with two overlapping shafts and cone-shaped teeth, which makes it produce a versatile movement between those shafts. With its above average efficiency level, these gearboxes work well under pressure and lower gear ratios. They are also the right gearboxes if you’re not in a hurry.

Maintenance: Give it a regular visual inspection. Check for any oil leaking from seals, caps, pipe plugs, and pinion housing. If the temperature rises above 200° F, then it needs to be replaced.

4. Spiral gearboxes

Belonging to the Bevel category, these types come with teeth that engage in a slow manner. These gearboxes also offer a similar efficiency level as Spur’s and Helical’s but they are less noisy and smoother.

Maintenance: Make sure the oil level and temperature (100° C) is properly balanced and maintained. Get a standard oil change after the first 500 hours.

5. Hypoid gearboxes

Another type under the Bevel category, these gearboxes are utilized for 90-degree drive shafts. They are also quieter but surprisingly powerful. Their systems are also well-suited for extremely speedy ratios but their mechanical capacity is average.

Maintenance: To keep an effective lubrication and keep up with the pressure, you will need a special Extreme Pressure (EP) oil.

6. Planetary gearboxes

These gearboxes come with many exterior gears that circulate around the centre gear, hence the name. Their efficiency levels are high despite working with lower speeds and the load transmission is to thank for. They also fit well with helical gear and are incredibly compact.

Maintenance: Beware of the friction on the bearings, gears, and seals. Ensure you’re using the right size to prevent fatigue fracture from happening to the gears.

Find Australian Transtecno gearbox types.

These are the types of gearboxes available in the market today. Make sure you buy the right one for your machine. Now, if you’re interested in ordering a Transtecno gearbox in Australia, just visit http://edingtonagencies.com.au/geared-electric-motors-australia for viable products.

Leave a Reply

Your email address will not be published. Required fields are marked *